Sharpening styles
There are four main points to select from; the one you choose will depend on the type of pencil you use, and the style of your drawing.
The standard point
Everyone knows about this one, its trademark conical point is the most common and the most versatile of sharpening styles. If you’re looking for a good all-rounder for most types of pencils then this is the best. Plus if you don’t have a sharpening knife then you probably don’t have a choice.
There are a couple of drawbacks with this style however. The standard point can get blunt quickly, particularly if you are using softer pencils such as charcoal. On larger drawings you will find yourself constantly sharpening the damn thing. Often lower quality pencils will contain a smaller diameter core of graphite; if this is slightly off-centre you will find the wood comes so close to the point on one side that it’s almost unusable. This can very be frustrating.
The chisel point
This is a rarely seen style where the end of the pencil is cut with a knife into a chisel shape. The main benefit of the chisel is its ability to draw two types of marks on the paper; thin dark lines from along the sharp edge and softer, wider lines from the flat faces. The soft lines are great for rough construction at the start of a drawing and simply turning the pencil on its edge gives you extra precision when you need it. Another neat feature is its ‘self-sharpening’ property. As you use the chisel on its face it actually helps keep the edge sharp. This means you can spend more time drawing and less time sharpening – great for softer pencils! The straight edge can also be used on an angle to give lines a calligraphy style.
One problem with the chisel design is it can be difficult to master. When drawing with the flat face it’s all too easy to accidentally roll your wrist and wear away the corners of the chisel shape. It can also take a bit of work to carve the chisel to begin with. If you can overcome these minor annoyances then the chisel point may be for you.
The needle point
This is a specialist design that is carved with a knife into a sharp concave point. The idea is that such a fine point can wear down a long way before it actually becomes too blunt to use. This style is great for perfectionists who want precise control over their lines and extra fine detail.
There are a number of potential problems with this design. A fine point such as this is prone to constant breaking so it’s only suitable for harder pencils. The needle point can only make the one type of mark too, a fine line, so there is not a lot of flexibility here. Colouring in large sections of solid tone can be very time consuming so you are limited to smaller sized drawings.
The bullet point
This is my personal favourite and one I devised myself. In this style the wood is removed from the last centimeter of the pencil then the end of the lead is sharpened into a bullet shape. Two types of marks can be made from this design; a softer line from the side of the bullet and a sharp line from the point. Like the chisel, it has a ‘self-sharpening’ property. The bullet point is also good for hard and soft pencils.
There are not many drawbacks with this design except to say that it does take a minute or two to carve the design to begin with. If you haven’t tried this before, give it a go.
Popularity: 1% [?]
















Be The First To Comment
Related Post
Please Leave Your Comments Below